85d6a5 No.291
do it nerds
All brass Stillare and Nemmy combo w/ platinum contacts. Hits like a freight train.
44964f No.296
Black stillare on a setinel m16, dual parallel micro on 24 gauge
pic is here >>285
454f78 No.306
Smoktech Magneto mod w/ Smoktech RSST hybrid atomizer. 22GA Kanthal with a regular cotton wick.
Convenient for in the car/on the go, but planning on getting a dual coil drip atty sometime soon. Any recommendations?
a7d561 No.378
>>291Vaping on this sexy beast
IPV V2
Patriot RDA
Dual 15 wrap nano coil @ .6 ohms
anywhere from 20-35 watts
a7d561 No.379
>>306Im gonna shill the patriot. Nice posts. Big Screw heads that ive yet to strip even after use for almost a year. Plus that shit is sexy as fuck.
454f78 No.410
>>376
Haha thank you! Didn't actually intend to get two SmokTech products - realized it afterwards, since I switched to the Magneto after my Kamry K300 kicked the bucket.
>>379
Sounds excellent. Do you use an actual Patriot or a clone? Any significant differences?
And thank you both for the recommendations.
5c8627 No.412
>>410It's actual. i don't have experience with the clone so i wouldn't know.
5c8627 No.413
>>410I have a clone patriot and it works great. i don't have experience with the legit other than using it from my friends and there seems to be no difference. with clones it's hit or miss. some items are going to be made great, others will be shitty. if you buy online you can almost always send it back.
2e65b8 No.436
>>378w-what wire are you using ohmo
3dfc65 No.437
>>436I believe he uses 28 gauge kanthal
44964f No.443
>>436Im using 28 guage. twas pretty nice. Now im vaping dual parallel macro coils. 6 wraps at .3
fe04bc No.1593
All off fasttech
2 x stingray mods
kayfun lite+ with finned mini top cap and i like the nemisis drip tip on it, running at 0.7Ω twisted 29g 5wraps 2.5mm coil.
Mainly use the Magma dripper with the standard stingrayx drip tip. running at 0.5Ω dual 29g twisted 7 wraps each 2.5mm coil cotton wicks on both.
panasonic 2900mah pf's
(good down to 0.4Ω)
sony 2100mah vct4
(phasing out)
Favorite all day vape
bobbas nana clone
(sometimes i add koolada)
70vg 30pg 12mg nic
5.0% LA Banana Cream
3.0% TFA Dragon Fruit
7.0% TFA Strawberry
1 drop per mL Citric Acid
1 drop koolada/15ml (sometimes)
steep for a month - if vaped straight from mixing the dragon fruit is dominant. I prefer at least a two week stee, longer the better for the strawberry to come through and the dragon fruit to mellow a bit.
8c284c No.1619
>tfw no mod
Might buy some shit off fasttech when I get my paycheck.
0f788d No.1620
>>443Six wraps on what? A 2mm drill bit?
2aecb5 No.1625
b2c31a No.1628
Dovpo DT-50 50 watt box mod
MCV Little Boy RDA
.6 ohm 6 wrap macro coil
This is the love of my life <3
8c284c No.1648
>>1625who are you? I don't even fucking know anyone who goes on 8chan.
2927e0 No.1669
>>1628 How are you liking the little boy? I've been thinking of buying one but i m not too sur
b2c31a No.1708
>>1669Honestly, I'm loving it. It hits very nicely. It's a little bit of a bitch to build on sometimes, and you should ONLY BUY IT if you love a tremendous amount of airflow with little room for configuration. I could post some pictures of mine sometime, if you'd like.
c7dab4 No.1710
b2c31a No.1711
b2c31a No.1712
>>1710I put it in an album on Imgur. Here's the link.
http://imgur.com/a/CiO2qHere's a general review of it and what it comes with:
3 post design.
Decent juice well.
Threaded top cap rather than use of O-rings
Barrel is held to deck by O-rings
Comes fitted with a wide-bore drip tip but also comes with a delrin adapter for any 510 tips and drip tips.
Has 3 wide airflow holes, can be used in dual, and single coil, I believe. One other review says you can use quad coils but I'd think you'd be hard pressed to fit that in there.
Flavour is pretty good.6/10
Vapor production is awesome. 8/10
Threads on it are very smooth.
I only have 1 real complaint and that is that it's extremely leaky with lower VG fluids. I normally vape 30%vg or 33%vg and it would leak like a motherfucker but I'm using 50% at the moment and it hasn't leaked on me once.
d08a87 No.1722
the chinaman santa is gonna clone the tomahawk for me.
9b7170 No.1811
File: 1417410983245.jpg (70.52 KB, 541x960, 541:960, 10679919_816006728464524_7….jpg)
first ever mech mod + RDA.
5c8627 No.1813
>>1811thats a nice setup you got there man! how are you liking it?
5b6639 No.1817
>>1811nice
mine is a black hawk clone and a kayfun 3 clone with a 30w AWT
9b7170 No.1822
>>1813it's great, hits like a truck and the flavor is phenomenal. kind of a bitch training myself to inhale slower (used to use a kanger genitank and iStick) and juicing up all the time, but it treats me right
1f0abb No.1886
OKV Beta Box. Dual parallel 18650
Warlock RDA.
87a380 No.1889
Am I the only one who feels queezy at the thought of my juice or vapor touching brass or copper? Copper and brass can contain lead (and zinc for brass)and the oxidation layer is nasty stuff.
0cbc20 No.1890
>>1889not bothered by it at all. reputable manufacturers sourcing copper and brass for vape equipment don't use lead and zinc. the fact that someone else, somewhere else, could alloy these metals with lead is not relevant.
clones might be another story. i dunno, i don't use clone stuff.
0d7b3b No.1893
>>1890There's no brass without zinc, it's just copper then. Zinc is what makes copper, brass.
Furthermore the oxidation of copper is very damaging. If you can't find the material in the food-safe category, it shouldn't be used for atomizers either (except things like firing pins that never come in contact with liquid).
7573c9 No.1894
>>1893???
there are tons of bare copper and brass products for food and drink.
0d7b3b No.1895
>>1894http://www.fda.gov/Food/GuidanceRegulation/RetailFoodProtection/FoodCode/ucm188064.htm#part4-2
>(A) Except as specified in ¶ (B) of this section, copper and copper alloys such as brass may not be used in contact with a food that has a pH below 6 such as vinegar, fruit juice, or wine or for a fitting or tubing installed between a backflow prevention device and a carbonator.The FDA disagrees and it applies to juices since the majority of them are acidic. Furthermore, just the oxidation is poisonous by itself. Unless new data come out I will consider people using copper-based things for atomizers fools
7573c9 No.1896
>>1895holy fuck, tame your autism. there is no risk whatsoever. you are fucking insane.
0d7b3b No.1897
>>1896>there is no risk whatsoeverCigarette manufacturer's in the early 20th century.
Interaction of alloys with various liquids are not a mystery. It's safe to assume that if it's not safe for food, it's not safe for vaping either. If you want to claim they are safe, contrary to existing research you should do a study and try to prove it.
7573c9 No.1898
>>1897you've failed to show that these compounds develop in appreciable quantities in vapes, you've failed to show that they vaporize at typical vape temperatures, and you've failed to show that they pass through the lungs into the bloodstream. you are making wild assumptions based on unrelated circumstances – on quantities of food orders of magnitude higher, in contact with copper surfaces orders of magnitude higher, under different conditions with entirely different substances involved. the burden is on you to demonstrate a risk. so far you have offered only paranoia.
0d7b3b No.1899
>>1898The truth is we don't know yet. It's not impossible to think copper oxides traveling through the airstream and getting inhaled. Furthermore, we know that copper interacts with acidic liquid and that zing seeps into liquids in general. We know that both of these situations are bad, we don't know if they affect eliquids. But until research shows there are no issues with such materials, it better to err on the side of caution. In any case we do have food-grade SS available, there is no reason to use any other kind of material.
7573c9 No.1900
>>1899you have no idea what kind of compounds form in a vape made from any material. your position demands you refrain from all vaping. you cannot defend just rejecting copper RDA terminals or brass caps. it makes no sense.
aed0fd No.1911
I have seen copper leech into the cotton on several copper RDAs.
I love my copper shit but I don't want copper in my vape path. It's great for the mod body and pins but the deck interior and topcap inside should be SS.
8308e6 No.1947
My SMPL came in today, have my doge on it now.
It's smaller than I expected it to be, you can see how small compared to the zippo sized juice bottle.
Hits like a damn train though.
8308e6 No.1948
>>1947Running at about .21Ω with 5 wrap alternator coils using 22g/24g kanthal.
8c284c No.1949
I am too retarded for a mech mod.
K-Simar 20 Gravity Mod + Aspire Atlantis
f45d93 No.1952
Magma clone on an istick, chucking the flavor while drinking coffee with my dad who still does analogs.
5b6639 No.1967
>>1948>>1947vintage make incredible flavors, I wish there was a recipe guide on how to copy them
I'd make them max vg, though. It hurts on a dripper as is. Also the price is ridiculously high for my poor ass
11aec8 No.1968
>>1949Just a bit of a tip, make sure the holes where the juice goes to the wick are fully exposed, helps saturate it better.
8308e6 No.1971
>>1967I really like the dreamer,The lady that owns a local shop gave it to me because I recommended that she order them. They sent the samples and she let me pick which one I wanted. I thought the dreamer was kinda bioshock-esque so I chose it.
454f78 No.1975
>>1896Aaaah, name calling. PLEASE refrain from this; it undermines your credibility in any argument.
>>1898Well, that's better! Anyways, it's not required that you reach the average temperature inside a copper (or any other material) vessel to begin vaporizing small amounts of it. Since temperature is just the average dispersion of heat energy over a given area, there are still higher-energy particles which collide with the walls of the vessel. This allows very small amounts of the material to be vaporized. NO, it will not vaporize a sizable amount of copper, but it's safer to use a material with a higher vaporization point (stainless steel.)
However, the more pertinent danger is the creation of copper oxides. While they have a high vaporization point as well, the primary concern is any oxide traveling with small droplets of vaporized liquid and entering the lungs. Because copper corrodes far more easily than stainless steel, the danger from oxidized particles is far greater. Unlike elemental copper, copper oxides also have proven negative health effects on humans: they can cause damage to the endocrine and nervous systems, and inhalation can lead to damage of the lungs and septum.
This by no means is definitive proof that copper atomizers will seriously harm you - however, it's safer to go with the more physically resilient material.
8c284c No.1976
>>1968Thanks I will start making sure they're lined up.
d13f63 No.2015
just thought i'd post a nice set of titties, hope you don't mind
3ac7a5 No.2056
Manhattan brass mechanical mod
CEO Fog RDA with a sleeper coil with two 3 wrap spots for japanese cotton wicks
Cuttwood Monster Melons juice, 70/30 but i mix it down with some VG
first mod ever, first vape ever. just got it tonight. still need an ohm reader.
823bf0 No.2057
>>2056Somebody wanted to get rid of his badly-venting COMPETITION GRADE mod, lel.
Get a FUhattan for $35(that's identical, performs better and is safer) and make a profit by selling the Manhattan to some stupid bloke.
This all assumes the Manhattan is not a clone.
3ac7a5 No.2059
>>2057it's a tobeco clone
i'm running efest 18650 2500mAh 3.7v 35A on a single 26g kanthal coil with 6 wraps right now, it's producing nice flavorful hits
it has vent holes in the bottom of the cap where the button is, but the tube itself is sealed
why do you recommend it? just purely safety? also, should i invest in some VTC3 or 4s?
74211c No.2060
>>2059The efest is 20 amps continuous. The 35amp rating applies only to a 100 ms pulse or so.
Personally I'd buy Samsung 25Rs since they are reliable, are correctly rated for their 20 amp limit and are widely and cheaply available so there are no clones of them.
I'd never buy Efests, they rewrap various cells and lie about their capabilities.
74211c No.2061
>>2060Regarding the tube, remove the top cap and battery and try to blow from the hole. If air is escaping through the button assembly without restriction, it's okay. If the airflow feels restricted (like in the original) then don't use it. If a battery vents in there it will blow up like a pipebomb.
3ac7a5 No.2063
>>2061air passes through, it doesn't require a large PSI to get stuff through. a stiff, steady stream of air gets through the button.
5e6daa No.2097
DIY OKR box
Orchid v3 clone
Boba's Bounty
5e6daa No.2098
>>2097Cana mod and Russian 91
5e6daa No.2099
>>2098hammer and aqua clone
38fb3b No.2107
>>2099holy shit that vape pipe looks so sexy
5e6daa No.2123
>>2107Thanks! The thing is built like a brick and has horrible voltage drop, even the authentic and the 16350 limits the power, but I love the hell out of it.
13bea7 No.2201
>>2056>>2057just picked up a fuhattan today. lower voltage drop than my manhattan, even.
this thing has a better magnent and much better venting. love it so far.
7c8748 No.2205
I'm disappointed. At first, this was one of the smoothest hitting and most aesthetic vapes that I've ever owned, but after having it cook of in my pocket and catch my wick on fire even though the safety was on, I'm beginning to regret my purchase.
aed0fd No.2207
>>2059You could drill an extra vent hole in the body where the battery sits.
aed0fd No.2208
>>2205Well, if it's not safe in the pocket, it's safe for the desk. Sucks though. I have different mods for travel and desk use, I like my copper penny since I don't have to lock it for it to stand up stable but I wouldn't carry it with me anywhere because the threads on the locking ring are kinda torn up.
7c8748 No.2210
>>2208That is what I intend to do with it. Right now, though, all I have for walking around is a shitty njoy pen vape, so most off the time, I'll end up just taking the slug instead and risking it. I'm thinking about going back to the iTaste MVP, but my job destroyed my first one and I have some reservations aboutgoing back with a tanker.
5b6639 No.2227
smpl with a fogger v4
is v gud build, I'm proud of myself
0f788d No.2259
>>2227It may look nice, but with the short throw and no locking switch, this is gonna be my at-home vape from now on.
0a1d9c No.2641
Got this dna 30 mod from one of my friends and a trident V2, came from a VTR.
I fucking love this setup
391bcf No.2644
I got this whole setup for $44
>kanger aerotank mini
>kangertech EMOW battery
>usb charger
>sirius vapors bold tobacco 18ml
b42498 No.2651
MutationX on a Silver Bullet 24G Kanthal 6 wraps duel coils .3 ohms
46d088 No.2686
Bought it for the novelty but it turned out to be a very nice dripper for clouds. Deep well, good machining, orings grip just the right amount and the chuff cap is fun.
ecfb88 No.2693
Mutilator on Fuhattan. 0.2 ohms
80da62 No.2711
>>2693whered you get that tip and does it look like youre suckin dick when you use it?
ecfb88 No.2712
>>2711tip came from a mutation X, and it looks like i'm smoking a hookah hose, sans the hose.
54b6a8 No.2723
>>1886What's the advantage of running a dual battery mech mod like this Do you get more amps out of it or what? I know batteries are sup pissed to last longer but is that it?
54b6a8 No.2724
>>2059The batteries you have now are fine I'd say I ordered the same ones for my mod neither of which have arrived in the mail yet but from what I understand the 35 amp efest aren't 35 amp continuous draw they're more around 25ish BUT they can spike up to 35 amps and they can do it for around 75 seconds so unless your firing your device for longer than 75 seconds you should be perfectly fine as long as you're device isn't pushing past 35 amps but to be safe I'd try to stay under 30
54b6a8 No.2725
>>1967So that's a bottle of e liquid? That's pretty sick it looks like a zippo lighter what does the dreamer taste like?
281b65 No.2788
Kanger Sub tank on a penny mod clone, I'm a big fan of this set up right now.
f26f2e No.2809
>>2788I'm considering getting one of those KangerTech Subs.
Be interested to hear any comments you have on it.
I've heard really good things about it, (from the guy in my vape shop who is trying to sell it to me!)
Am using a TaifunGT which I am really happy with, I would just feel better with a backup tank.
Just wondering how you are getting on with it?
0c5524 No.2810
>>2809Kanger really hit the nail on the head when they made this tank. It was a great idea, and vape shops around me can't seem to keep it in stock. The rebuildable deck is awesome, along side being able to use the OCC heads instead of the rebuildable deck. The cloud production is extremely impressive on them, as well as the flavor, as you'd get from any tank. It's great.
Source: I own one.
1cca92 No.2814
I bounce back and forth from the Doge and the Atlantis.
f26f2e No.2816
>>2810Thanks for the feedback, you seem pretty happy with it !
Reckon I'll be splashing out next pay day on one.
Thinking of running it with a Pioneer IPV Box Mod…
I've only been vaping for 5 months and although I've learned a lot in that time, I still consider myself a n00b in the whole vaping world.
To be honest I've learned a shitload lurking this board, and for that I thank you all.
a3bf8a No.2819
>>2814Currently running a first gen mutation x and I fucking love it. I have wanted a doge for a while but I have heard that the clones are spotty at best and I don't want to just throw away $15 as I am vaping on a pretty tight budget right now. I will have the money later in the month, do you think I should get one or should I just wait for them to do another official run?
8c284c No.2822
>>2814I approve of your glass protector.
5bd20c No.2931
>>2686
Does it come with the coolface?
0c5524 No.2933
Toxik back with a new daily mod. Upgraded from my DOVPO DT-50 to an IPV 3. Still rocking the Little Boy.
d43153 No.2936
Currently I got a Panzer blackhawk clone and a Robot V
aefa0b No.2957
Atlantis v2 on my 50w eleaf with lust in the tank with a bit of holy water for hint of menthol.
6a0ebc No.2963
>>2931
Isn't it obvious?
Here it is on my new SMPL from Fasttech. I don't know about other clones but this one is awesome. Hits "hard", the switch is smooth and the finish is perfect
79d931 No.2964
e2d2e9 No.2982
Sigelei 150 with a DarkHorse Clone
Eventually I'll get an authentic RDA
f926b5 No.2983
Nothing fancy. just standard Evod tank and Ego type batt. never felt the need for anything more heavy duty.
a984ad No.2992
>>2957
I have a eleaf 50w! I was wondering how you like it? Do you feel the need to upgrade? I use mine with a Kanger Subtank nano. Am I a noob?
ebebc8 No.3042
SX350 hammond box mod with a custom powdercoat paint job
3dfb96 No.3053
SX mini M with atlantis v2 and yeti juice.
83ee67 No.3329
Requesting online vendor recommendations. Recently left my box mod (cheap ITaste) at someone's house and now I'm at a loss.
e62e0c No.3330
>>3329
Vapecrawler.com if you want to find those with the best prices
Want a great online vendor though, 88evape.com is a good one. 101vape as well
802700 No.3331
>>3330
inb4
>gtfo shill
love ya /vape/
be0bad No.3368
My dildo is Aspire CF Maxx with Atlantis Mega, firing with 0.3ohm coils.
I'm waiting for my Innokin iTaste VTR to reach my doorstep, ordered it last week.
>>1628
That's a one badass looking mod.
>>1886
I have always wanted a wooden boxmod.
>>2099
Cute.
>>2822
I like your purple theme.
41905c No.3369
Been using a IPV4 for a while now, with a Doge v2. Currently have a 9 wrap single standard coil, 0.08 ohm base resistence @ 50 Joules, and capped at 425 F.
Kind of annoying how vapor production decreases if the wick isn't totally saturated, but never having to deal with getting dry hits again is well worth it.
I'd like to switch over to Titanium wire soon, but nobody around here sells it yet so I'll have to pick it up online next time I have to restock on wire.
7b0232 No.3377
Running a Herakles tank with .6 ohm coil on top of an iTaste MVP 3.0 Pro 60 watt 4500 mAh
646794 No.3399
Been using the IPV3-LI for a while. It's an awesome mod, with great battery life for my usage. Also great for temp control, as i've discovered the world of no dry hits.
The zephyrus on the other hand is a bitch to rebuild. The deck is tiny and wicking is not for begginers. I'm still learning to master it though because when it works the flavour and vapor production are excellent. Also more oriented at people who DIY because it drinks juice like an african american and koolaid.
Running dual kanthal 26AWG 7wrap coils @0.47 40W
5339e5 No.3411
currently just using the CF VV+ and Nautilus mini I got in one of Aspire's starter packs a few weeks ago. I replaced the plain glass tube with the steel lattice one after I dropped it like a retard one night, I like its new look alot more.
Gonna replace the vv+ with a istick 30w in a few days though, probably will just give the battery to a friend who wants to get into vaping
5339e5 No.3425
>>3411
got the istick from a good B&m and wow what an upgrade. Defiantly gets the most out of the nautilus mini but still has alot of possibilities with future tanks.
speaking of which im really tempted move up to sub ohm now and im trying to decide between a aspire Atlantis/Atlantis v2 or one of the kanger subtanks. opinions?
5339e5 No.3454
>>3425
update to bump thread I guess.
got subtank mini and its great. Gonna try the RBA once the .5 coil head dies