>>690797
Poormetto State Armory is decent enough and has a big community of fans. They also have decent customer service, if maybe not always the best QC. Other choices in budget/"starter" ARs about which I have heard mostly good things are Andro Corp and One Horse. Diamondback, Radical Firearms, and Bear Creek Arsenal do not have such positive reputations. People will also call IWI, Ruger, and S&W ARs "budget" or "starter," but they are on a different level, both quality-wise and price-wise, so they really shouldn't be mentioned in the same sentence as PSA.
To the extent that you have a choice, I personally recommend that you pick out one with mid-length gas rather than carbine gas. All the budget AR uppers are always overgassed to the moon, smashing the bolt carrier and buffer violently to the rear on every shot, battering the receiver extension and maybe the shooter–I've seen ARs that kicked harder than lightweight bolt-actions that weighed less. Carbine gas systems, with the port further from the muzzle, have more dwell time, making the problem worse. You are going to need an H2 or H3 buffer to reduce muzzle rise. The "carbine buffer" that everyone puts in the cheap guns has three steel weights, no tungsten, and for the waaaaaaaaaaaaay oversized gas ports the cheap rifles have, this is no bueno. (why do they give them giant gas ports? to help reliability with cheap ammo that may not produce a pressure curve that's within spec. the people who build and sell the cheap rifles have noticed that their customers buy a lot of cheap ammo. that's why) If you get a lower with a fixed A1 or A2 stock it'll almost certainly have the rifle buffer, which is 2+ ounces heavier than the cheap "standard carbine buffer" and which addresses these issues. I know everyone hates fixed stocks and wants the M4 stock. Just price H3 buffers and figure one into the total cost, maybe an extra power buffer spring too.
If you plan on running a light then you may want to pick one out that has a handguard with a full length Picatinny rail on top. That's where I put my switches, so they fall right under my thumb. People will tell you about the need for a polished, super light trigger, but, meh. It may sound like heresy to some but the stock trigger components are absolutely perfectly fine if you have your shit together, if you know about trigger control. Just get good mags. Pmags are fine. Pick out an optical sight first (I personally favor an LPVO but this is a very personal choice). BUIS can come later. Try to stick with ammo that's close to the spec the rifle was designed for. M193 is generally going to be a lot cheaper than M855. 5.56 runs at higher pressures than .223, with a different pressure curve, and 5.56 is what the guns are built to run on. Some "budget" rifles will run with steel case ammo and some won't, despite gigantic oversized gas ports. And the cheap Russian steel case .223 that was so plentiful 15+ years ago isn't really a thing any more anyway. Maybe get some inexpensive spare parts–springs, detents, pins, spare extractors, spare firing pins. You don't need them until you do.